1. S. M. Afonin. Structural Scheme of Electroelastic Actuator for Nanomechatronics. National Research University of Electronic Technology (Moscow Institute of Electronic Technology, MIET) Moscow, Russia

2. Afthab Afrathim¹, Saravanan Karuppanan¹, Santosh S. Patil². Burst Strength Analysis of Thin Composite Pressure Vessels. ¹Department of Mechanical Engineering, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, Perak, Malaysia; ²Department of Mechanical Engineering, Manipal University Jaipur, Dehmi Kalan, Jaipur, India

3. Ankit Nayak^a, P. K. Kankar^b, Prashant K Jain^a, Niharika Jain^c. Acquisition and Analysis of Endodontic Handpiece Vibration Signals. ^aCAD/CAM Lab, Mechanical Engineering Discipline, PDPM, Indian Institute of Information Technology, Design and Manufacturing Jabalpur, Madhya Pradesh India; ^bDiscipline of Mechanical Engineering, Indian Institute of Technology Indore, Madhya Pradesh, India; ^cDepartment of Conservative Dentistry and Endodontics, Triveni Institute of Dental Science, Hospital and Research Centre, Bilaspur, Chhattisgarh, India

4. M.A. Antakov, S.A. Tereshchenko. New Criterion for Analysis Tomographical Properties of Miltipinhole Coded Apertures. Institute of Biomedical System National Research University of Electronic Technology (MIET), Zelenograd, Russia

5. Belenov S.V., ^a Yohannes W., ^b Lyanguzov N.V., ^с Guterman V.E., ^a Volochaev V.A.^a Investigation of the effect of different organic additives on morphology and electrocatalytic activity of platinum nanomaterials towards oxygen reduction reactions. ^aSouthern Federal University, Chemistry Department, Rostov-on-Don, Russia; ^bCollege of Natural and Computational Sciences, Department of Chemistry, Addis Ababa University, Addis Ababa, Ethiopia; ^cSouthern Federal University, Physical Department, Rostov-on-Don, Russia

6. V.V. Belozerov¹, Nguyen Tuan Anh², Vl.V. Belozerov¹. Improvement of BETA-analysis for viscous media, flammable liquids and flame-retardant coatings. ¹Don State Technical University, Rostov-on-Don, Russia; ²Fire Safety Institute, Hanoi, Vietnam

7. T. I. Belyankova^1,2, E. I. Vorovich³, V. V. Kalinchuk^1,2, O. M. Tukodova³. Investigation of initial stresses' influence on surface wave field in Bulk Metallic Glass layer. ¹Southern Scientific Center of Russian Academy of Sciences, Rostov-on-Don, Russia; ²I. I. Vorovich Institute of Mathematics, Mechanics and Computer Science, Southern Federal University, Rostov-on-Don, Russia; ³Don State Technical University, Rostov-on-Don, Russia

8. Boris V. Bondarev. EQUATION FOR DENSITY MATRIX SYSTEMS OF IDENTICAL PARTICLES. Moscow Aviation Institute, Moscow, Russia

9. Bui Van-Bien¹, Banh Tien-Long², Nguyen Duc-Toan²_. Assessment the surface roughness of metal mechanical parts by Microsoft Kinect V2. ¹Hai Phong University, Haiphong, Vietnam; ²Hanoi University of Technology and Science, Hanoi, Vietnam

10. N.I. Buravchuk¹, O.V. Guryanova¹, M. A. Jani², E. P. Putri². NEW MATERIALS FOR ROAD CONSTRUCTION. ¹I. I. Vorovich Mathematics, Mechanics and Computer Sciences Institute, Southern Federal Univ
About the Author:

Dr. Sc. Ivan A. Parinov received his M.Sc. in Mechanics from Rostov State University, Mechanics and Mathematics Department in 1978 (Rostov-on-Don, Russia), his Ph.D. in Physics and Mathematics from Rostov State University in 1990 and his Dr. Sc. in Techniques from South-Russian State Technical University in 2008. He is a corresponding member of the Russian Engineering Academy (2014) and since 1978 is working in the I. I. Vorovich Mathematics, Mechanics and Computer Sciences Institute of the Southern Federal University (former Rostov State University) where he is currently Chief Research Fellow. From 1993 to 2019, he headed the Research Grants and Programs from the Soros Foundation, Collaboration for Basic Science and Education (COBASE, USA), Russian Foundation for Basic Research (14 grants), Russian Ministry for Science and Education (9 grants and scientific proposals). He has published over 350 scientific-technical publications, among them there are 30 monographs (in particular, 9 books published with Springer and 15 books with Nova Science Publishers). He currently holds 14 Russian and Soviet patents. His scientific achievements have been recognized with over 30 gold medals and special awards from European and Asian exhibitions. Since 1994 Parinov has been a reviewer for the Zentralblatt für Mathematik (Germany) and Mathematical Reviews (USA) (over 450 reviews). He has held positions as INTAS expert (2004), FP-7 expert (2010), ERA.NET RUS expert (2011, 2015), expert for the Russian Academy of Science (since 2016), the Russian Foundation for Basic Research expert (since 2017), the Russian Science Foundation expert (since 2019) and Russian Federal expert in the area of science and technology (2012-2021). He is the winner of a competition of the Russian Department of Education and Science (2014-2016 and 2017-2019) for "Organization of Fulfillment of the Scientific Researches". I. A. Parinov is active member of the New York Academy of Sciences (1994), and member of the American Mathematical Society (since 1996), the European Mathematical Society (from 1998) and The Indian Structural Integrity Society (since 2016). He holds the honorary title "Honorary Member of All-Russian Society of Inventors and Rationalizers" (2008). His research interests include R&D of novel materials and composites (in particular, high-temperature superconductors and ferro-piezoelectrics), fracture mechanics and strength physics, acoustic emission, optics, mathematical modeling, different applications of advanced materials and composites.

Dr. Shun-Hsyung Chang received his Ph.D. in electrical engineering from National Sun Yat-Sen University, Taiwan in 1990. Afterward, he served as an Associate Professor and has been a Full Professor since 1997 in the Department of Electrical Engineering at National Taiwan Ocean University, Keelung, Taiwan, where he was also Chairman from 1998 to 2003. He had served as the Vice President of National Kaohsiung Marine University, Kaohsiung, Taiwan, from 2003 to 2006, and is currently a professor in the Department of Microelectronic Engineering at the National Kaohsiung University of Science and Technology (former National Kaohsiung Marine University). He was head of 3 grants in 2010-2017 within joint programs of the Ministry of Science and Technology of Taiwan and the Russian Foundation for Basic Research. He has published over 250 scientific-technical publications, among which are 12 monographs. In 1984, he was granted The Creative Youth prize by the Ministry of Education. He received the Long-Term Paper Award, organized by Acer Incorporated, in 1994, 1996 and 1998. He and his graduate students won the Third Prize of Graduate Team in TI-Taiwan 1994 DSP Design Championship. He also obtained the Distinguished Award in the contest of Special Topic of Communication System in graduate division held by the Ministry of Education in 2000. He contributes greatly to editorship. He was the Editor-in-Chief of the Journal of Marine Science and Technology 1998-2001, of which he is presently an Editor. He is currently the Editor-in-Chief of the Journal of Ocean and Underwater Technology 2008-2019. His research interests include electrical engineering; electronics and communication engineering; signal, image, video and array processing; underwater and acoustic communication; underwater acoustics; Kalman filtering and detection.

Dr. Sc. Banh Tien Long received a Mechanical Engineering Engineer degree in 1973, a Doctor of Engineering in 1977, and a Doctor of Science and Technology in 1991 in the Czech Republic. He received the title of Associate Professor in 1996, and the title of Professor in 2002. He was assigned the title of People's Teacher in 2010 by the President of Vietnam. Currently, he is a member of the National Council of Science and Technology Policy, and the National Council member, for the title promotion of State Professor of Vietnam. He is The Chair of the Council for the National title promotion of Professor of Mechanical and transport Engineering. He is Professor and Senior Lecturer at Hanoi University of Science and Technology, a member of the board of accreditation of education quality, Editor-in-Chief of Science and Technology Journal of 7 technical universities of Vietnam, Chair of the Academic Council of Hung Yen University of Education and Technology. He is President of the Vietnam Association for Science Editing (VASE), President of the Council of Asian Science Editors, and Vice President of Vietnam Federation of Mechanical Engineering Associations. As a permanent Vice Minister of the Ministry of Education and Training of Vietnam, he was in charge of higher education and professional education, national entering university exams, education quality accreditation, and the reform program "University Education 2006-2020" (HERA). He was a Director of higher education projects I (ODA), career orientation program in higher education (POHE). Before becoming the Deputy Minister of Education and Training, he was the Director of the Higher Education Department under the Ministry of Education and Training of Vietnam, the Vice President of Hanoi University of Science and Technology (HUST), Vice-Dean, Head of Department of Material machining and industrial instruments, Hanoi University of Science and Technology. His research interests include materials science, mechanical engineering, manufacturing technologies, mechanical and dynamic industry, industrial materials and tool processing.