Buy Manufacturing Engineering Book by Uday S. Dixit
Manufacturing Engineering

Manufacturing Engineering


     0     
5
4
3
2
1



International Edition


About the Book

A Variable Viscosity Approach for the Analysis of Static and Dynamic Performance Parameters of Three-Lobe Fluid Film Bering Operating with Tio2 Based Nanolubricant.-Friction stir welding of shipbuilding grade DH36 steel.- Experimental investigation on the effect of cryogenic co2 cooling in end milling of aluminium alloy.- Transient thermal analysis of CO2 laser welding of AISI 304 stainless steel thin plates.- Transient Thermal Analysis On Friction Stir Welding Of AA6061.- Recycling Of H30 Aluminium Alloy Swarfs Through Gravity Die Casting Process.- Effect on Mechanical and Metallurgical Property of Cryogenic Treated Material SS316.- Microstructure And Mechanical Properties Of Lamellar TI-6AL-4V Eli Alloy.- Influence Of Process Parameters On Surface Roughness Hole Diameter Error And Burr Height In Drilling Of 304l Stainless Steel.- Investigation Of Impression Creep Deformation Behaviour Of Boron Modified P91 Steel By High End Characterization Techniques.- Tribological and Machining Performance of Graphite, CaF2 and MoS2 Coated Mechanical Micro-Textured Self-Lubricating Cutting Tool.- Chemical Assisted USM Of Acrylic Heat Resistant (BS-476) Glass.- Study Of Temperature Distribution During Fsw Of Aviation Grade AA6082.


About the Author:

Dr. Vishal Sharma is a Professor at the Department of Industrial and Production Engineering at Dr. B. R. Ambedkar National Institute of Technology, Jalandhar. He obtained his bachelor's degree (Production Engineering) from Shivaji University, Kolhapur; masters in Mechanical (Production) Engineering from Punjab University Chandigarh; and his Ph.D. in Mechanical Engineering from Kurukshetra University. He also received a postdoctoral fellowship from ENSAM Cluny, France. He has published more than 70 scientific papers in international journals and conferences, and edited more than 15 books and proceedings. His current research interests include additive manufacturing and 3D printing, machining, condition monitoring, industrial IOT/Industry 4.0.

Dr. Uday Shanker Dixit is a Professor at the Department of Mechanical Engineering at IIT Guwahati. He received his bachelor's degree (Mechanical Engineering) from IIT Roorkee in 1987; and his masters and Ph.D. (Mechanical Engineering) from IIT Kanpur in 1993 and 1998, respectively. He has published over 200 scientific papers in international journals and conferences, and edited more than 12 books and proceedings. He has also undertaken 19 research and consultancy projects. In addition to developing course material on mechatronics for IGNOU, and on engineering mechanics for NPTEL, he has produced QIP course material in the area of "Finite Element Method in Engineering and its applications in manufacturing", and "Introduction to Micro-manufacturing Technologies". His research interests include plasticity, metal forming, laser-based manufacturing, finite element modeling, and optimization. He has authored/edited more than 15 books and proceedings.

Dr. Noe Alba-Baena is a Professor at the Department of Industrial and Manufacturing Engineering, UACJ, Mexico. He received his bachelor's degree in Industrial and Systems Engineering from the University of Juarez City, Mexico in 1999 and his masters (Industrial Engineering) and Ph.D. (Material Science & Engineering), both from University of Texas at El Paso in 2002 and 2006, respectively. He was awarded an M.Ed. (Educational Administration) degree by the same university in 2009. He has published more than 50 scientific papers in international journals and conferences. He also holds two patents: "Methods for industrial-scale production of metal matrix nanocomposites" and "Apparatus and methods for industrial-scale production of metal matrix nanocomposites". His current research interests include aluminum alloys, nanocomposites, ultrasonic treatment, product design, and manufacturing processes.



Best Sellers



Product Details
  • ISBN-13: 9789811362897
  • Publisher: Springer
  • Publisher Imprint: Springer
  • Height: 234 mm
  • No of Pages: 202
  • Series Title: Lecture Notes on Multidisciplinary Industrial Engineering
  • Sub Title: Select Proceedings of Cpie 2018
  • Width: 156 mm
  • ISBN-10: 9811362890
  • Publisher Date: 14 Aug 2020
  • Binding: Paperback
  • Language: English
  • Returnable: Y
  • Spine Width: 11 mm
  • Weight: 358 gr


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Manufacturing Engineering
Springer -
Manufacturing Engineering
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Manufacturing Engineering

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals



    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!